Rockwell-automation AADvance Controller Configuration Guide Manuel d'utilisateur télécharger pdf (Page 110)



5-12

Document: 553633

ICSTT-RM405f-EN-P

Issue 07

Configuration Guide (AADvance Controller)

Configure the I/O Module Process Safety Time

When you configure the process safety time for an I/O module, you can choose to

inherit the top-level value set for the processor or specify a value for the I/O module.

To define the I/O module process safety time do the following:

1) Select a module from the I/O Bus.

2) Put a tick in the Inherit box to inherit the top-level Process Safety Time; or

3) De-select the Inherit box and enter a value into the Process Safety Time field.

Wire Status Variables to I/O Modules

You can wire a variable to an I/O module so the application can receive status

information from the module. The AADvance Workbench provides a structure

(T9K_TA_GROUP_STATUS) for module status information. To wire a status

variable to an I/O module do the following:

1) Declare a variable in Dictionary. Use the type T9K_TA_GROUP_STATUS and

make sure that the direction is set to input.

2) Select a module from the I/O bus.

 The unwired term appears in the Variable field.

3) Click the button adjacent to the Variable field.

1 2 ... 105 106 107 108 109 110 111 112 113 114 115 ... 285 286

Pas de commentaire

Rockwell-automation AADvance Controller Configuration Guide Manuel d'utilisateur Page 110