Rockwell-automation AADvance Controller Configuration Guide Manuel d'utilisateur télécharger pdf (Page 101)



Document: 553633

ICSTT-RM405f-EN-P

Issue 07

5-3

Example Controller Configuration

This example controller has two 9110 processor modules and supports 8 digital inputs

and 8 digital outputs.

Note: The '9801' and '9851' illustrated are simplex termination assemblies for the I/O

modules and provide the connections for the field elements.

This controller has the following physical layout: the two I/O modules are installed to

the right of the processor base unit, which is IO Bus 1. The 9401 is installed in the

first I/O base unit connector, which is slot 1; the 9451 is installed adjacent to the 9401

in the next connector on the I/O base unit, which is slot 2.

You now have to configure the same arrangement in the project tree, connect

variables to monitor module status information and I/O data. Use the Project Tree

View within the AADvance Workbench to assign the I/O modules to empty slot

numbers on the processor IOB IO Bus 1 or IO Bus 2.

1 2 ... 96 97 98 99 100 101 102 103 104 105 106 ... 285 286

Pas de commentaire

Rockwell-automation AADvance Controller Configuration Guide Manuel d'utilisateur Page 101