Rockwell-automation AADvance Controller Configuration Guide Manuel d'utilisateur télécharger pdf (Page 100)



5-2

Document: 553633

ICSTT-RM405f-EN-P

Issue 07

Configuration Guide (AADvance Controller)

Example I/O Slot Configuration

In the example illustrated, the modules have been configured as follows:

 A redundant group of analogue input modules has been configured in the first

three slots.

 Two digital input modules are in the next two slots.

 There is a single digital input module.

 There is a group of two digital output modules.

 Two single digital output modules.

Important Note: For Release 1.3 you can change the I/O module configuration with

an on-line update without having to stop the running application. However, if you are

still using an earlier product release the I/O module configuration cannot be changed

with an on-line update.

Defining the I/O Hardware Architecture

The I/O hardware architecture is the physical arrangement of the I/O modules in the

AADvance controller. To define the I/O hardware architecture in the AADvance

Workbench you assign the modules to empty slot numbers on the processor I/O

buses. Use the Project Tree View to do this. If desired, you can clear an I/O slot or

move an assigned module to a different slot.

1 2 ... 95 96 97 98 99 100 101 102 103 104 105 ... 285 286

Pas de commentaire

Rockwell-automation AADvance Controller Configuration Guide Manuel d'utilisateur Page 100