Rockwell-automation 5730 DriveLogix5730 Controller for PowerFlex 700S Manuel d'utilisateur télécharger pdf (Page 117)

Communicating with Devices on an EtherNet/IP Link 6-13

Accessing Distributed I/O

I/O information is presented as a structure of multiple fields, which depend

on the specific features of the I/O module. The name of the structure is

based on the location of the I/O module in the system. Each I/O tag is

automatically created when you configure the I/O module through the

programming software. Each tag name follows this format:

Location:SlotNumber:Type.MemberName.SubMemberName.Bit

where:

This address

variable: Is:

Location Identifies network location

LOCAL = local DIN rail or chassis

ADAPTER_NAME = identifies remote adapter or bridge

SlotNumber Slot number of I/O module in its chassis

Type Type of data

I = input

O = output

C = configuration

S = status

MemberName Specific data from the I/O module; depends on the type of data the module

can store

For example, Data and Fault are possible fields of data for an I/O module.

Data is the common name for values the are sent to or received from I/O

points.

SubMemberName Specific data related to a MemberName.

Bit (optional) Specific point on the I/O module; depends on the size of the I/O module

(0-31 for a 32-point module)

Example

1 2 ... 112 113 114 115 116 117 118 119 120 121 122 ... 216 217

Pas de commentaire

Rockwell-automation 5730 DriveLogix5730 Controller for PowerFlex 700S Manuel d'utilisateur Page 117