Rockwell-automation 284E ArmorStart with EtherNet/IP - User Manual Manuel d'utilisateur télécharger pdf (Page 296)

296 Rockwell Automation Publication 280E-UM001B-EN-P – July 2012

Appendix B CIP Information

The following common services are implemented for the Overload Object.

Device Level Ring (DLR)

Object

CLASS CODE 0x0047

The following class attributes will be supported for the DLR Object.

A single instance (Instance 1) will be supported with the following instance attributes.

Attribute ID Access Rule Name Data Type Value

3 Get/Set FLA Setting BOOL xxx.x amps

4 Get/Set Trip Class USINT —

5 Get Average Current INT xxx.x amps

7 Get % Thermal Utilized USINT xxx% FLA

8 Get Current L1 INT

xxx.x amps9 Get Current L2 INT

10 Get Current L3 INT

190 Get/Set FLA Setting Times 10 BOOL xxx.xx amps

192 Get Average Current Times 10 UINT xxx.xx amps

193 Get Current L1 Times 10 UINT

xxx.xx amps194 Get Current L2 Times 10 UINT

195 Get Current L3 Times 10 UINT

Service Code

Implemented for:

Service NameClass Instance

0x0E No Yes Get_Attribute_Single

0x10 No Yes Set_Attribute_Single

Attribute ID Access Rule Name Data Type Value

1 Get Revision UINT 2

Attribute ID Access Rule Name Data Type Value

1 Get Network Topology USINT 0 = Linear, 1 = Ring

2Get Network StatusUSINT 0 = Normal

1 = Ring Fault

2 = Unexpected Loop Detect

3 = Partial Network Fault

4 = Rapid Fault/Restore Cycle

10 Get Active Supervisor Address Struct of

UDINT

Array of 6

USINT

Ring Supervisor

12 Get Capability Flags DWORD 0x00000002

1 2 ... 291 292 293 294 295 296 297 298 299 300 301 ... 347 348

Pas de commentaire

Rockwell-automation 284E ArmorStart with EtherNet/IP - User Manual Manuel d'utilisateur Page 296