Rockwell-automation 284E ArmorStart with EtherNet/IP - User Manual Manuel d'utilisateur télécharger pdf (Page 289)

Rockwell Automation Publication 280E-UM001B-EN-P – July 2012 289

CIP Information Appendix B

All instances contain the following attributes.

➊ For DOP Instances 1, 2, 9 and 10, Attributes 113 and 114 have “Get” only access, and their values are always 0.

The following common services are implemented for the Discrete Output Point

Object.

Instance Name Alternate Mapping Description

1 Run Fwd Output 0029-01-03

Run Forward output. For all starter types, this output is hard wired from the

ArmorStart CPU to the actuator.

2 Run Rev Output 0029-01-04

Run Reverse output. For all starter types, this output is hard wired from the

ArmorStart CPU to the actuator.

3User Output 1 None

These are the two ArmorStart user outputs for all starter types.

4User Output 2 None

5 Drive Input 1 None

These four instances exist for Inverter units only. They are drive the outputs on

the main control board that are connected to Drive Inputs 1…4.

6 Drive Input 2 None

7 Drive Input 3 None

8 Drive Input 4 None

9Drive Jog Fwd None

This instances exists for Inverter units only.

10 Drive Jog Rev None

Attribute ID Access Rule Name Data Type Value

3 Get Value BOOL 0 = OFF, 1 = ON

5 Get/Set Fault Action BOOL 0 = Fault Value attribute, 1 = Hold Last State

6 Get/Set Fault Value BOOL 0 = OFF, 1 = ON

7 Get/Set Idle Action BOOL 0 = Fault Value attribute, 1 = Hold Last State

8 Get/Set Idle Value BOOL 0 = OFF, 1 = ON

113 Get/Set

➊ Pr Fault Action BOOL 0 = Pr Fault Value attribute, 1 = Ignore

114 Get/Set

➊ Pr Fault Value BOOL 0 = OFF, 1 = ON

115 Get/Set Force Enable BOOL 0 = Disable, 1 = Enable

116 Get/Set Force Value BOOL 0 = OFF, 1 = ON

117 Get/Set Input Binding

STRUCT:

USINT

Array of USINT

Size of Appendix I encoded path

Appendix I encoded path

NULL path means Attribute 3 drives the output.

Otherwise, this is a path to a bit in the Bit Table.

Service Code

Implemented for:

Service NameClass Instance

0x0E Yes Yes Get_Attribute_Single

0x10 No Yes Set_Attribute_Single

1 2 ... 284 285 286 287 288 289 290 291 292 293 294 ... 347 348

Commentaires sur ces manuels

Pas de commentaire

Rockwell-automation 284E ArmorStart with EtherNet/IP - User Manual Manuel d'utilisateur Page 289

Commentaires sur ces manuels

Produits connexes et manuels pour Équipement Rockwell-automation 284E ArmorStart with EtherNet/IP - User Manual