Rockwell-automation GV3000/SE Operator Interface Module (OIM) User Gui Manuel d'utilisateur télécharger pdf (Page 61)

7-2

GV3000/SE Operator Interface Module (OIM) User Guide, Version 2.0

The fault screen tells you which fault occurred - in this example, the HIGH LINE

VOLTAGE fault. If more faults occur, they are displayed after is pressed to clear

the first fault.

When an alarm occurs:

•

the alarm or fault indicator turns on.

•

alarms are not logged.

•

an alarm message is displayed on the OIM screen, such as the one shown in figure

7.2.

The alarm message screen tells you which alarm occurred - in this example, the LOW

AC INPUT LINE alarm. Press to clear the screen.

If a fault and an alarm occur at the same time, the fault message is displayed. If

multiple faults and alarms have occurred, you can review them one at a time using the

Fault and Alarm Menus.

To identify the problem when a fault or alarm occurs, use the Fault or Alarm Menu or

the tables provided in chapter 5 of the software I/M. The screens in the menus and the

tables give the probable cause and corrective action to take when a fault or alarm

occurs.

Tables 7.3 and 7.4 in this chapter cross-reference the alarm and fault messages you

will see on the OIM with the fault and alarm codes as they are listed in the software I/M

and displayed on the front panel keypad/display.

When a fault is corrected, you must reset the faults before starting the drive. Alarms

are automatically reset when the problem is corrected.

Figure 7.2 – Example of an Alarm Screen

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 111 112

Pas de commentaire

Rockwell-automation GV3000/SE Operator Interface Module (OIM) User Gui Manuel d'utilisateur Page 61