Rockwell-automation GV3000/SE Operator Interface Module (OIM) User Gui Manuel d'utilisateur télécharger pdf (Page 18)

2-6

GV3000/SE Operator Interface Module (OIM) User Guide, Version 2.0

2.2.2 Key Indicators

The key indicators at the bottom of the display indicate the states of the keys directly

below them. In figure 2.2, the keys are set to PROGRAM, OIM, MANUAL, and

FORWARD. Key indicators are described in table 2.4.

Interlock OK On The terminal strip function loss input is

closed. See the hardware I/M for more

information. Also see the description of

Function Loss Response (P.026) in the

software I/M for a description of the types of

responses available on function loss.

Off The terminal strip function loss input is open.

See the hardware I/M for more information.

Drive Ready On The drive is ready to run or jog. See chapter

7 for more information.

Off The drive is not ready. See chapter 7 for

more information.

Running On Output power is being applied to the motor

(the motor is running or jogging).

Off Output power is not being applied to the

motor.

Current Limit

Torque Limit

On The drive is in current or torque limit.

Off The drive is not in current or torque limit.

Table 2.3 – Drive Status Indicators (Continued)

Indicator State Description

Table 2.4 – Key Indicators

Key Indication Description

PROGRAM The OIM is in program mode.

MONITOR The OIM is in monitor mode.

(blank) The OIM is in a fault, alarm, or diagnostic menu.

FAULT The Fault Menu is displayed.

ALARM The Alarm Menu is displayed.

DIAGS The Diagnostics Menu is displayed.

LOCAL The drive’s front panel keypad/display is used to

control the drive.

TERMBLK The signals at the Regulator board terminal strip

are used for control.

OPTION An option board, such as the AutoMax

Communication Network Option board, is

controlling drive operation. Blinks when the option

board is not communicating on the network.

OIM The OIM keys control drive operation.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 111 112

Commentaires sur ces manuels

Pas de commentaire

Rockwell-automation GV3000/SE Operator Interface Module (OIM) User Gui Manuel d'utilisateur Page 18

Commentaires sur ces manuels

Produits connexes et manuels pour Équipement Rockwell-automation GV3000/SE Operator Interface Module (OIM) User Gui