Rockwell-automation 1761-NET-ENIW MicroLogix Ethernet Interface (ENI) Manuel d'utilisateur Page 99

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 144
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 98
Publication 1761-UM006E-EN-P - August 2005
Connecting CompactLogix Controllers on Ethernet 8-7
Figure 8.5 ENI #1 Configuration - Message Routing Screen
Before we download our configuration to ENI #1, we must configure
the “Utility Settings” tab in the ENI/ENIW Configuration Utility.
Choose the following settings.
Figure 8.6 ENI #1 Configuration - Utility Settings Screen
Then, connect the serial cable between your computer and ENI #1
and click on the ENI IP Addr tab. From this tab, under the “Save To
column, click the ENI ROM button. This downloads your
configuration parameters to ENI #1 and saves it to non-volatile
memory.
Configure ENI #2
ENI #2 is connected to the CompactLogix controller. This ENI/ENIW
must be configured with its own IP address (131.200.50.94 for this
example) and we must add the IP addresses of the SLC 5/05 controller
and the 1756-ENBT/ControlLogix controller to its Message Routing
table. The Message Routing table allows for up to 50 IP addresses to
Vue de la page 98
1 2 ... 94 95 96 97 98 99 100 101 102 103 104 ... 143 144

Commentaires sur ces manuels

Pas de commentaire