Rockwell Automation 22-WIM-N4S Manuel d'utilisateur télécharger pdf (Page 35)

Configuring the WIM 3-15

2. In the text box, enter the desired name (for example, Pump 1) and

click Apply. Then click Close to close the WIM properties screen.

3. For the entered name to be recognized on the network, either reset

the WIM or power cycle the drive. Then re-establish wireless

communication between the WIM and the desktop or laptop

computer.

TIP: When using DriveExplorer version 5.01 or higher, you can also

name the WIM with this alternate method:

A. With the DriveExplorer/DriveExplorer Lite Menu Tree window

(Figure 3.25

) displayed, select the “22-WIM-Nx Wireless Module”

in the tree view to display the WIM Product Window (Figure 3.27) in

the right pane.

Figure 3.27 WIM Product Window

B. Click the gray “22-WIM-Nx” title header in the WIM Product

Window to display the WIM name text entry box (Figure 3.28).

Figure 3.28 WIM Name Text Entry Box

C. Enter the desired name (for example, Pump 1) and click Apply.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 99 100

Pas de commentaire

Rockwell Automation 22-WIM-N4S Manuel d'utilisateur Page 35