Rockwell-automation Liqui-Flo Control Configuration Software Version 6 Manuel d'utilisateur télécharger pdf (Page 72)

8-6

Control and Configuration Software V6.1

8.10 Monitoring Drive Indicators

The Drive Metering box displays six drive indicators for GV3000 or Liqui-Flo drives or

five drive indicators for FlexPak 3000 drives. The items displayed in the Drive Metering

box are dependent on drive type and regulation type.

Each drive metering value is displayed as a visual thermometer-type indicator and as

a numeric value. If the numeric value exceeds the range of the indicator, the indicator

moves slightly beyond the far right line in the indicator grid. The units (RPM, Amps,

etc.) shown in figure 8.1 are examples only. The actual units are defined by the drive

type are preset.

For: The following indicators are listed:

GV3000 or Liqui-Flo drives configured

for vector regulation

• Selected reference

• Motor speed

• Motor current

• Motor voltage

• Motor torque

• Output power

GV3000 or Liqui-Flo drives configured

for volts/hertz regulation

• Selected reference

• Output speed

• Output frequency

• Motor voltage

• Motor current

• Output power

FlexPak 3000 drives • Selected reference

• Motor speed

• Armature volts

• Motor current

• Percent load

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 99 100

Pas de commentaire

Rockwell-automation Liqui-Flo Control Configuration Software Version 6 Manuel d'utilisateur Page 72