Rockwell-automation 284E ArmorStart EtherNet IP Communications and Con Manuel d'utilisateur télécharger pdf (Page 9)

Rockwell Automation Publication 280E-PM001A-EN-P – August 2011 9

ArmorStart

EtherNet/IP

™

Communications & Control Programming Manual Chapter 1

5. Select the ArmorStart in your application and click OK.

6. The AOP is shown below. Enter a Name for this ArmorStart and an

Ethernet address. For this example, the Private Network setting will be

used. This should be set to match the IP address switch setting on the

ArmorStart. Then press OK.

Note: Refer to Using the Rotary Network Address Switches

Appendix B to set an IP address on the device.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 89 90

Pas de commentaire

Rockwell-automation 284E ArmorStart EtherNet IP Communications and Con Manuel d'utilisateur Page 9