Rockwell-automation 1788-EN2DN Ethernet-to-DeviceNet Linking Device Manuel d'utilisateur télécharger pdf (Page 7)

Ethernet-to-DeviceNet Linking Device 7

Rockwell Automation Publication 1788-IN055C-EN-P - September 2011

System Requirements

The following hardware and software components are required to use the

linking device.

Required Hardware

• 1788-EN2DN linking device

• DeviceNet cabling, power, and devices forming a DeviceNet network

• Ethernet cabling and power

• Computer with access to the Ethernet network

• Computer running DeviceNet configuration software

The DeviceNet slave devices with which the linking device

communicates are specified using a DeviceNet Configuration Software

tool such as RSNetWorx for DeviceNet software.

• 24V DC power to the linking device

DeviceNet power may be used; however, using DeviceNet power

bypasses the DeviceNet network isolation.

Required Software

• DeviceNet configuration software, such as RSNetWorx for DeviceNet

software, version 4.01 or later, to configure DeviceNet devices and the

linking device’s DeviceNet functionality

• RSLinx



software, version 2.31 or later

• DHCP server 2.3.2 or later, which ships with RSLinx software version

2.42 and later. If you are using an earlier version of RSLinx software, you

will need to download the standalone server from

http://www.rockwellautomation.com/support

1 2 3 4 5 6 7 8 9 10 11 12 ... 55 56

Pas de commentaire

Rockwell-automation 1788-EN2DN Ethernet-to-DeviceNet Linking Device Manuel d'utilisateur Page 7