Rockwell-automation 1785-RC Application Relay Interface Installation I Manuel d'utilisateur télécharger pdf (Page 3)

3/&5HOD\&DUWULGJH 

Note: If the relay cartridge is not inserted into the PLC-5 processor, the

processor will operate normally, but will not exhibit any of the necessary

relay cartridge functions

3. Remove the black screw on the lower Communication Interface Plug

on the PLC-5 controller.

4. Hold the cartridge retention bracket over the relay cartridge and position

the bracket to align the screw holes of the bracket and the

Communication Interface Plug.

5. Replace the screw and tighten securely.

This bracket holds the relay cartridge in place when you detach the

connector from the relay cartridge.

18590-M

Relay cartridge

Keying pin

Removable

Retention bracket

connector

Screw

1 2 3 4 5 6 7 8 ... 11 12

Pas de commentaire

Rockwell-automation 1785-RC Application Relay Interface Installation I Manuel d'utilisateur Page 3