Rockwell-automation 1738-AENTR, Series B POINT I/O and ArmorPOINT I/O Manuel d'utilisateur télécharger pdf (Page 108)

102 Rockwell Automation Publication 1734-UM017B-EN-P - October 2013

Appendix B Adapter Web Dialogs

After completing a query, here is how a typical Browse Chassis page looks.

3. To view information about a particular module, click the corresponding

Module Description hyperlink. In the following example, the first Module

has been selected:

The 1734 Module Information page opens showing this information

about the module:

• Product Name

• Ve n d o r

• Product Type

• Product Code

• Module Revision

• Serial Number

• Status

If there is no response to

the query, the Module not

found message appears.

1 2 ... 103 104 105 106 107 108 109 110 111 112 113 ... 119 120

EtherNet/IP Adapters 1
Important User Information 2
Who Should Use this 3
Purpose of this Manual 3
Common Techniques Used 4
Table of Contents 5
Adapter Features 9
What the Adapter Does 10
Physical Features of Your 11
Adapters 11
software releases 12
chassis size 12
Replacement 13
Use of the Common 14
Industrial Protocol (CIP) 14
Chapter Summary 16
Overview 17
A = DIN rail 18
Install POINT I/O Modules 19
Remove POINT I/O Modules 19
Remove ArmorPoint I/O Modules 22
Replace An Adapter 23
Wire the Adapter 24
for more information 26
third party DHCP server 27
Configuration 28
Requirements 28
Gateway Address 29
Subnet Mask 30
Network Address 31
Use the Rockwell BootP/ 32
DHCP Utility 32
1. Run the BootP software 33
Save the Relation List 35
Use DHCP Software to 36
Configure Your Adapter 36
Set Up the Hardware 38
Create the Example 39
Application 39
Configure the I/O Modules 40
New Module 41
Name Local_ENBT 42
IP Address 10.88.70.4 42
Add the POINT I/O Adapter 44
Name POINT IO Adapter 45
IP Address 10.88.70.2 45
IMPORTANT 45
1734-SG001 48
The New Module dialog opens 49
Ethernet 53
Edit the Controller Tags 54
Create the Ladder Program 55
Download the Program to 55
Verify the Module Chassis 56
3. Select Properties 57
4. Click the Connection tab 57
Configure the Adapter with 59
Fixed IP Address 59
Recover From an 60
Overloaded Adapter 60
Software 61
Connection 72
72
10. Click OK 77
Verify the Module 79
Chassis Size 79
8. Click OK to continue 80
Access Module Data 82
Troubleshoot the Adapter 83
1738-AENTR 86
Series B 86
Specifications 89
Power Supply 91
EtherNet Communication 91
Environmental 92
Adapter Web Dialogs 93
Work with the Diagnostics 95
Download EDS files for 96
Use the Network Settings Page 97
Use the I/O Connections Page 100
Work with the 102
Configuration Pages 102
Use the Identity Page 104
Use the Services Page 106
Work with the Browse 107
Chassis Page 107
If there is no response to 108
Communication Driver 109
Configure the AB_ETH/IP 112
Rockwell Automation Support 120
Documentation Feedback 120

Commentaires sur ces manuels

Pas de commentaire

Rockwell-automation 1738-AENTR, Series B POINT I/O and ArmorPOINT I/O Manuel d'utilisateur Page 108

Commentaires sur ces manuels

Produits connexes et manuels pour Équipement Rockwell-automation 1738-AENTR, Series B POINT I/O and ArmorPOINT I/O