Rockwell-automation 1738-AENTR, Series B POINT I/O and ArmorPOINT I/O Manuel d'utilisateur Page 105
- Page / 120
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
Rockwell Automation Publication 1734-UM017B-EN-P - October 2013 99
Adapter Web Dialogs Appendix B
Use the Network Configuration Page
To use the Network Configuration page to make entries for enabling or disabling
DHCP and setting TCP/IP parameters and Ethernet link operation, follow this
procedure.
1. Click Network from the tab at the top of the page or panel on the left. The
Network Configuration page opens.
2. From the Network Configuration page, complete these entries, noting that
values for Network Interface are disabled when DHCP is
Dynamic DHCP and port speed and duplex mode are disabled when
Autonegotiate Speed and Duplex is selected.
• For Initial Network Configuration:
– Ethernet Interface Configuration
- Static
- Dynamic DHCP
• For Network Interface, select from these choices:
– IP Address
- EtherNet/IP Adapters 1
- Important User Information 2
- Who Should Use this 3
- Purpose of this Manual 3
- Common Techniques Used 4
- Table of Contents 5
- Adapter Features 9
- What the Adapter Does 10
- Physical Features of Your 11
- Adapters 11
- software releases 12
- chassis size 12
- Replacement 13
- Use of the Common 14
- Industrial Protocol (CIP) 14
- Chapter Summary 16
- Overview 17
- A = DIN rail 18
- Install POINT I/O Modules 19
- Remove POINT I/O Modules 19
- Remove ArmorPoint I/O Modules 22
- Replace An Adapter 23
- Wire the Adapter 24
- for more information 26
- third party DHCP server 27
- Configuration 28
- Requirements 28
- Gateway Address 29
- Subnet Mask 30
- Network Address 31
- Use the Rockwell BootP/ 32
- DHCP Utility 32
- 1. Run the BootP software 33
- Save the Relation List 35
- Use DHCP Software to 36
- Configure Your Adapter 36
- Set Up the Hardware 38
- Create the Example 39
- Application 39
- Configure the I/O Modules 40
- New Module 41
- Name Local_ENBT 42
- IP Address 10.88.70.4 42
- Add the POINT I/O Adapter 44
- Name POINT IO Adapter 45
- IP Address 10.88.70.2 45
- IMPORTANT 45
- 1734-SG001 48
- The New Module dialog opens 49
- Ethernet 53
- Edit the Controller Tags 54
- Create the Ladder Program 55
- Download the Program to 55
- Verify the Module Chassis 56
- 3. Select Properties 57
- 4. Click the Connection tab 57
- Configure the Adapter with 59
- Fixed IP Address 59
- Recover From an 60
- Overloaded Adapter 60
- Software 61
- Connection 72
- 72
- 10. Click OK 77
- Verify the Module 79
- Chassis Size 79
- 8. Click OK to continue 80
- Access Module Data 82
- Troubleshoot the Adapter 83
- 1738-AENTR 86
- Series B 86
- Specifications 89
- Power Supply 91
- EtherNet Communication 91
- Environmental 92
- Adapter Web Dialogs 93
- Work with the Diagnostics 95
- Download EDS files for 96
- Use the Network Settings Page 97
- Use the I/O Connections Page 100
- Work with the 102
- Configuration Pages 102
- Use the Identity Page 104
- Use the Services Page 106
- Work with the Browse 107
- Chassis Page 107
- If there is no response to 108
- Communication Driver 109
- Configure the AB_ETH/IP 112
- Rockwell Automation Support 120
- Documentation Feedback 120
Produits connexes et manuels pour Équipement Rockwell-automation 1738-AENTR, Series B POINT I/O and ArmorPOINT I/O
Équipement Rockwell-automation 1769-ADN Compact I/O DeviceNet Adapter Manuel d'utilisateur
(28 pages)
(28 pages)
Équipement Rockwell-automation 1747-PCINT API Software for 1746 I/O Manuel d'utilisateur
(155 pages)
(155 pages)
Équipement Rockwell-automation 1746-NI16V SLC 500 Analog I/O Modules Manuel d'utilisateur
(20 pages)
(20 pages)
Équipement Rockwell-automation 1746-MPM INSTALL INSTRUC MOLD PRESSURE Manuel d'utilisateur
(24 pages)
(24 pages)
Équipement Rockwell-automation 1771-OFE/B Analog Output Module User Manual Manuel d'utilisateur
(84 pages)
(84 pages)
Équipement Rockwell-automation 1784-KTCX15 INSTL INSTR CONTROLNET COMM. Manuel d'utilisateur
(18 pages)
(18 pages)
Équipement Rockwell-automation 1760-xxxx Pico Controller User Manual Manuel d'utilisateur
(218 pages)
(218 pages)
Équipement Rockwell-automation 1769-SDN Compact I/O DeviceNet Scanner Module User Manuel d'utilisateur
(156 pages)
(156 pages)
© 2020, manymanuals.fr. Tous droits réservés | 0.229 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels