Rockwell-automation RECOMM-DNET DeviceNet Adapter for use with DPI AC Manuel d'utilisateur Page 95
- Page / 168
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
DeviceNet Adapter Parameters
B-3
DeviceNet data rate if the data rate switch is set to “PGM”
(Program).
DeviceNet data rate actually used by the adapter.
Size of the Reference/Feedback. The drive determines the size of
the Reference/Feedback.
Size of each Datalink word. The drive determines the size of
Datalinks.
5 DN Rate Cfg
Range:
0 = 125 kbps
1 = 250 kbps
2 = 500 kbps
3 = Autobaud
Default:
3 = Autobaud
Type:
Read/Write
Reset Required:
Yes
6 DN Rate Actual
Range:
0 = 125 kpbs
1 = 250 kbps
2 = 500 kbps
3 = Autobaud
Default:
0 = 125 kbps
Type:
Read Only
Reset Required:
N/A
7 Ref/Fdbk Size
Range:
0 = 16-bit
1 = 32-bit
Default:
0 = 16-bit
Type:
Read Only
Reset Required:
N/A
8 Datalink Size
Range:
0 = 16-bit
1 = 32-bit
Default:
0 = 16-bit
Type:
Read Only
Reset Required:
N/A
- DeviceNet Adapter 1
- DPI AC Drives 1
- Contents 3
- List of Figures 7
- List of Tables 9
- Introduction 11
- 1.2 Related Documentation 12
- Electric 13
- Getting Started 15
- 2.2 Required Equipment 16
- 2.3 Installation Checklist 17
- Step Action Refer to 18
- Installing the 19
- 3.5 Applying Power 23
- Configuring the 25
- SP600 Standard 31
- 4.5 Setting the Data Rate 32
- Peer-to-Peer 33
- 4.9 Setting a Fault Action 41
- 4.10 Resetting the Adapter 43
- 00010xxx 45
- 01234567 45
- 1=Enabled 45
- 0=Disabled 45
- Configuring the Scanner 47
- AC Drive 48
- Edit I/O 49
- Parameters 49
- 5.4) appears 49
- 5.3.1 Mapping the Input I/O 52
- 5.3.2 Mapping the Output I/O 53
- 5.4 Saving the Configuration 54
- Using I/O Messaging 55
- 6.4 Using Reference/Feedback 58
- 6.5 Using Datalinks 58
- Using Explicit 67
- Messaging 67
- ControlLogix Controller 68
- Using Explicit Messaging 69
- PLC or SLC Controller 70
- Word Description 71
- 7.4 Running Explicit Messages 73
- 7.5 ControlLogix Example 74
- 7.6 PLC-5 Example 76
- Ladder Logic Program 77
- 7.7 SLC Example 78
- Troubleshooting the 81
- and Network 81
- 8.1.1 DRIVE Status Indicator 82
- 8.1.2 MS Status Indicator 83
- 8.1.3 NET A Status Indicator 84
- 8.2 Adapter Diagnostic Items 85
- Technical 91
- Specifications 91
- 1DPI Port 94
- 2 DPI Data Rate 94
- 3 DN Addr Cfg 94
- 4 DN Addr Actual 94
- 5 DN Rate Cfg 95
- 6 DN Rate Actual 95
- 7 Ref/Fdbk Size 95
- 8 Datalink Size 95
- 9 Reset Module 96
- 10 Comm Flt Action 96
- 11 Idle Flt Action 97
- 12 DN Active Cfg 97
- 13 DPI I/O Config 98
- 14 DPI I/O Active 98
- 15 Flt Cfg Logic 99
- 16 Flt Cfg Ref 99
- Figure B.3 – M-S Input (25) 100
- 26 M-S Output 101
- 27 COS Status Mask 101
- 28 COS Fdbk Change 101
- 29 COS/Cyc Interval 102
- Peer A Input 102
- Peer B Input 102
- 32 Peer Cmd Mask 103
- 33 Peer Ref Adjust 103
- 34 Peer Flt Action 104
- 35 Peer Node to Inp 104
- 36 Peer Inp Timeout 105
- 37 Peer Inp Enable 105
- 38 Peer Inp Status 105
- 43 Peer Out Skip 107
- DeviceNet 109
- C.1 Identity Object 110
- Services 111
- C.2 Connection Object 112
- C.3 Register Object 114
- Instance Attributes 115
- C.4 Parameter Object 116
- C.5 Parameter Group Object 119
- C.6 PCCC Object 121
- C.7 DPI Device Object 123
- C.8 DPI Parameter Object 127
- DeviceNet Objects 129
- Descriptor Attributes 130
- Decimal Places 131
- Decimal Place) 131
- C.9 DPI Fault Object 137
- C.10 DPI Alarm Object 140
- C.11 DPI Time Object 142
- Logic Command/ 145
- Status Words 145
- Logic Status Word 146
- Logic Command/Status Words 147
- Master-Slave 149
- I/O Configuration 149
- Datalinks 152
- Datalinks (Continued) 153
- Datalinks (Continued) 155
- Datalinks 156
- Glossary-1 157
- Glossary-2 158
- Glossary-3 159
- Glossary-4 160
- Glossary-5 161
- Glossary-6 162
Produits connexes et manuels pour Équipement Rockwell-automation RECOMM-DNET DeviceNet Adapter for use with DPI AC
Équipement Rockwell-automation RECOMM-485 RS485 DFI Communications Module Manuel d'utilisateur
(68 pages)
(68 pages)
Équipement Rockwell-automation T8292 Trusted Power Distribution Unit MCB 24V Manuel d'utilisateur
(2 pages)
(2 pages)
Équipement Rockwell-automation 1440-SPD02-01RB XM-220 Dual Speed Module Manuel d'utilisateur
(12 pages)
(12 pages)
Équipement Rockwell-automation MD60 Door-Mount NEMA 1 OIM Bezel Kit MDI Manuel d'utilisateur
(6 pages)
(6 pages)
Équipement Rockwell-automation SP200 AC Drive, 1 2 Channel Analog, Preset Speed Manuel d'utilisateur
(68 pages)
(68 pages)
Équipement Rockwell-automation 440N Magnetically Operated Safety Switch Manuel d'utilisateur
(4 pages)
(4 pages)
Équipement Rockwell-automation T8017 Trusted Peer to Peer Communications Manuel d'utilisateur
(46 pages)
(46 pages)
Équipement Rockwell-automation GV3000/SE Operator Interface Module (OIM) User Gui Manuel d'utilisateur
(112 pages)
(112 pages)
© 2020, manymanuals.fr. Tous droits réservés | 0.122 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels