Rockwell-automation MMCL Using the Mining, Mineral, and Cement Library Manuel d'utilisateur télécharger pdf (Page 44)

Publication RA-UM001B-EN-P - November 2010

44 Developing an HMI Application

Diagnostic

The ControlLogix software provides a tag indication for proper Network

Communication {[E50_V16]NetworkOK.0}. On Network error, the module

color changes to RED. Clicking on the module opens a Network diagnostic

display for this network.

Clicking on the two processor modules next to DNB module in the chassis

also opens two different Controller Diagnostic faceplates. One is RSLinx

software-based and the other one is L_CPU_AOI instruction-based. Both are

provided as a user reference.

Network Screen

There is a direct reference tag used to indicate whether a module it is

healthy/available or not. For further information about the module status bits,

please refer to the RSLogix 5000 Online Help and search under

Module-Defined Data Types for the desired module.

The large red X indicates that modules are unhealthy/not available.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 91 92

Pas de commentaire

Rockwell-automation MMCL Using the Mining, Mineral, and Cement Library Manuel d'utilisateur Page 44