Rockwell-automation MMCL Using the Mining, Mineral, and Cement Library Manuel d'utilisateur télécharger pdf (Page 15)

Publication RA-UM001B-EN-P - November 2010

Developing an HMI Application 15

8. Select the revision that corresponds to your Ethernet device and click

OK.

9. Browse to the controller and select it.

10. Click Add.

11. Type a shortcut name (do not use spaces) which corresponds to name

defined in the Data Retrieval Tool.

12. Click Apply.

13. Repeat steps 1–12 for each controller.

TIP

In the following steps you create shortcuts to the HMI tags

in your controllers.

IMPORTANT

The shortcut name must correspond to the defined name

in the Data Retrieval Tool. These defined names can be

found within the file names of the files exported by the

Data Retrieval Tool (for example,

HMITag-[shortcut name].csv). The exported files are in the

Data Retrieval Tool directory.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 91 92

Pas de commentaire

Rockwell-automation MMCL Using the Mining, Mineral, and Cement Library Manuel d'utilisateur Page 15