Rockwell-automation 61C516 AutoMax/AutoMate 24VAC/DC Input Module Manuel d'utilisateur télécharger pdf (Page 12)

3Ć2

AC LINE

AUX

STOP

START

1 LS

24V AC

Figure 3.1 Ć Typical Field Signal Connections for 24V AC Inputs

Step 4. Take the module out of its shipping container. Take it out of

the antiĆstatic bag, being careful not to touch the

connectors on the back of the module.

Step 5. Insert the module into the desired slot in the rack. Use a

screwdriver to secure the module into the slot.

Step 6. Attach the field terminal connector (M/N 57C370, 61C505,

or 61C506) to the mating half on the module. Make certain

that the connector keys are oriented properly and that the

connector is the proper one for this module. Use a

screwdriver to secure the connector to the module.

Note that both the module and the terminal strip connector

are equipped with keys." These keys should be used to

prevent the wrong cable from being connected to a

module in the event that the connector needs to be

removed for any reason and then reĆattached later.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 37 38

Pas de commentaire

Rockwell-automation 61C516 AutoMax/AutoMate 24VAC/DC Input Module Manuel d'utilisateur Page 12