Rockwell-automation 2705 RediSTATION Operator Interface User Manual Manuel d'utilisateur télécharger pdf (Page 59)

Publication 2705-UM001A-EN-P

User Configuration C-5

To simplify wiring, input devices and output devices attach to

opposite ends of the I/O connector. The following table defines pin

functions on the I/O connector. Output devices connect to pins 1-2

and 3-4. Input devices connect to pins 5-6, 7-8, 9-10 and 11-12.

Unused pins are left open.

2. Mount the circuit board using the spacers and mounting screws

provided. Tighten circuit board mounting screws to 14 in–lbs.

3. Attach the 6 DeviceNet cable leads to the DeviceNet removable

terminal block connector.

Page 1-7 provides a description of the DeviceNet connections.

I/O Connector Pin # Pin Label Function

1 OUT1+ Connects Output Device

2OUT1-

3 OUT2+ Connects Output Device

4OUT2-

5 IN4+ Connects Input Device

6IN4-

7 IN3+ Connects Input Device

8IN3-

9 IN2+ Connects Input Device

10 IN2-

11 IN1+ Connects Input Device

12 IN1-

Removable Terminal

Block Connector

Pin 1

Pin 6

Common

CAN Low

Shield

CAN High

VDC+

E GND

1 2 ... 54 55 56 57 58 59 60 61 62 63 64

Pas de commentaire

Rockwell-automation 2705 RediSTATION Operator Interface User Manual Manuel d'utilisateur Page 59