Rockwell-automation 1788-EN2DNR EtherNet/IP to DeviceNet Linking Devic Manuel d'utilisateur télécharger pdf (Page 9)

Rockwell Automation Publication 1788-UM059A-EN-P - August 2014 9

Chapter 2

Install the Linking Device

System Requirements

The following hardware and software components are required to use the linking

device.

Required Hardware

• 1788-EN2DNR linking device

• Two 121 Ω (1%, 1/4 watt) termination resistors (shipped with the linking

device)

• DeviceNet cabling, power, and devices forming a DeviceNet network

• Ethernet cabling

• Computer with USB connection or access to the Ethernet network

• 24 V DC power to the linking device

DeviceNet power can be used; however, using DeviceNet power bypasses

the DeviceNet network isolation.

Required Software

• RSNetWorx for DeviceNet software, version 21 or later, to configure

DeviceNet devices and the linking device’s DeviceNet functionality

• RSLinx® software, version 3.51 or later

• RSLogix 5000 version 20 or Studio 5000 Automation Engineering &

Design Environment™, version 21 or later.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 51 52

Pas de commentaire

Rockwell-automation 1788-EN2DNR EtherNet/IP to DeviceNet Linking Devic Manuel d'utilisateur Page 9