Rockwell-automation 1788-EN2DNR EtherNet/IP to DeviceNet Linking Devic Manuel d'utilisateur télécharger pdf (Page 28)

28 Rockwell Automation Publication 1788-UM059A-EN-P - August 2014

Chapter 3 Configure the Linking Device

Studio 5000 Environment

These procedures explain how to work with the linking device in the

Studio 5000® environment.

Add the Linking Device to a Logix Designer Application

1. In the Studio 5000 Logix Designer™ application, from the File menu,

choose New to create a new project.

The New Controller dialog box appears.

2. From the Type pull-down menu, choose the controller type.

3. From the Revision pull-down menu, choose the controller version.

4. In the Name box, type a name for the controller project.

5. Click OK.

A project is created.

Configure the Linking Device

1. In the left pane, right-click I/O Configuration.

2. Click New Module.

3. From the Select Module Type dialog box, select any EtherNet/IP bridge

module (such as the 1756-EN2TR module) and click Create.

The New Module dialog box appears.

4. In the Slot Number pull-down, choose the slot number in which the device

resides.

5. Click OK.

6. In the right pane, right-click the EtherNet/IP module you just added to

your project and choose New Module.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 51 52

Pas de commentaire

Rockwell-automation 1788-EN2DNR EtherNet/IP to DeviceNet Linking Devic Manuel d'utilisateur Page 28