
Publication ENET-UM527E-EN-P - October 2006
44 Configure a Network Address For a Web Server Module
Verify Network Settings
Select Administrative Settings > Device Configuration > Network
Configuration. An authenticated user may modify network parameters.
In This Field Specify
Ethernet Interface Configuration The network configuration scheme:
• Dynamic BOOTP
• Dynamic DHCP (default)
• Static
IP Address IP address for the web server module:
If you want to specify a static IP address for the web server module, you must also select
Static for the Ethernet Interface Configuration field towards the bottom of this page.
Subnet Mask Subnet mask for the web server module.
Default Gateway Gateway address for the web server module.
Primary Server Name
Secondary Server Name
DNS server names, if using DNS addressing.
Domain Name Domain name for the web server module, if using DNS addressing.
Host Name Host name for the web server module, if using DNS addressing.
Name Resolution (DNS) Whether the web server module uses DNS addressing.
Commentaires sur ces manuels