Rockwell-automation 1746-SIM SLC 500 Input Simulator Installation Inst Manuel d'utilisateur télécharger pdf (Page 2)

2 SLC 500 Input Simulator

Publication 1746-IN024A-EN-P - October 2001

Installing the Input Simulator

1. Remove the RTB from the input module. To avoid cracking the RTB,

alternate between the two release screws when loosening.

ATTENTION

Installing the 1746-SIM on a module other than those listed

above can damage the module and expose you to hazardous

voltages.

ATTENTION

Never install or remove RTBs (removable terminal blocks) or

modules while power is applied to the SLC system.

Terminal Block Release Screws

Maximum Torque = 0.7 to 0.9 Nm (6 to 8 in-lb)

1746IN024AENP.fm Page 2 Tuesday, December 4, 2001 11:26 AM

1 2 3 4

Pas de commentaire

Rockwell-automation 1746-SIM SLC 500 Input Simulator Installation Inst Manuel d'utilisateur Page 2