Rockwell-automation 1746-NO8V SLC 500 8-Point Analog Output Module/ Us Manuel d'utilisateur télécharger pdf (Page 29)

Publication 1746-UM026A-EN-P - September 2003

Configuring the Module 4-5

d. The “Options” pull-down allows selection of the data format

(bits 4 to 6 of the channel configuration word):

Options:

1746-NO4 Data Format

Engineering Units

Scaled for PID

Proportional Counts

User-defined

e. “Latch Alarms” and “Reset Latched Alarms” check boxes allow

channel configuration word bits 14 and 15 to be configured.

f. The “Fault Options” pull-down allows channel configuration

fault options to be selected (bits 12 and 13 of the channel

configuration word).

Fault Options:

Reset Output

Hold Output

Preset Output

Refer to the remaining sections of this chapter for a full description of

the available configuration selections.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 73 74

Pas de commentaire

Rockwell-automation 1746-NO8V SLC 500 8-Point Analog Output Module/ Us Manuel d'utilisateur Page 29