Rockwell-automation 1734-ADNX POINT I/O DeviceNet Adpater User Manual Manuel d'utilisateur télécharger pdf (Page 60)

Publication 1734-UM002C-EN-P - July 2003

4-2 Configuring the 1734-ADN(X) Adapter’s SubNet

You must follow these steps during configuration:

1. Adding the Scanner to Your Network

2. Adding I/O Modules to Your Network

3. Setting the Scanner’s Parameters

4. Going Online

Adding the Scanner to Your Network

Follow these steps:

1. Start RSNetWorx for DeviceNet.

2. Add the scanner as shown below.

1. Expand the list of

communication adapters.

2. Expand the 1734-ADN POINT

I/O Scanner field.

The scanner appears

on the network.

IMPORTANT

The adapter must always exist on the Subnet at Node

00.

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 135 136

Commentaires sur ces manuels

Pas de commentaire