Rockwell Automation CDN366 Spécifications télécharger pdf (Page 31)

Verify the new parameters are correct. If a parameter is incorrect then make the necessary

changes.

6) If the “EDS Editor” menu is not

prompted then click on the

“Upload” icon to upload the

latest parameters to the CDN366.

7) Click on “All Parameters” and

select “Rx Inst 1”.

8) Click on “(Rx Inst-1) Data

Size” and enter 15.

9) Since the example is short-string

data type. Click on “(Rx Inst-1)

Data Type” and enter 218.

10) Click on “(Rx Inst-1) Data in

Poll Command” and set “Data

in Poll”.

11) Disable “Rx Inst-2 to Rx Inst-

8” serial receive by setting “Data

not in Poll”.

12) Click on “Rx Inst 1” in Groups:

and select “Tx Inst 1”.

13) Click on “(Tx Inst-1) Data Size”

and enter 2.

14) Since this example uses the short-

string data type. Click on “(Tx

Inst-1) Data Type” and enter

218.

15) Click on “(Tx Inst-1) Data in

Poll Command” and set “In Poll

Command”.

16) Disable “Tx Inst-2 to Tx Inst-8”

serial transmit by setting “Data

not in Poll Command”.

Click“OK”.

17) The “EDS Editor” menu is

prompted, click on “Yes” to

download new parameter settings

to CDN366.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 72 73

Pas de commentaire

Rockwell Automation CDN366 Spécifications Page 31