Rockwell-automation T7420A_AF ICS Regent+Plus Analog Input Modules 60H Manuel d'utilisateur télécharger pdf (Page 15)

Analog Input Modules

(T7420A, AF)

7023

Mar

Table

. Slot Key Positions.

Module

Upper

Connector

Lower

Connector

T7420A

Configuration

Each input module is configured using the

INTERPRET

I/O

Configuration Editor. In the editor, you will perform the

three steps described below to configure the input module.

1) Set the Module Type:

Position the cursor on the module slot you wish to define.

Choose Set Module Type from the Edit Menu and select

the appropriate analog input module from the list.

There are four different analog input module types listed

in the Set Module Type dialog. Be sure to select the

app

ropriate module, i.e. standard response (T7420A) vs.

fast response (T7420AF) and single

ended (16

channel) vs.

differential (8

channel).

2) Edit the Module Definition:

Choose Edit Module Definition from the Edit Menu. A

dialog box will open where you can define the input point

definitions. Single

ended analog input modules will show

sixteen points that you can configure, while differential

analog input modules will show eight points that you can

configure.

Important!

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 28 29

Pas de commentaire

Rockwell-automation T7420A_AF ICS Regent+Plus Analog Input Modules 60H Manuel d'utilisateur Page 15