Rockwell-automation AutoMax ControlNet Communication Interface Module Manuel d'utilisateur télécharger pdf (Page 10)

Page 10 AutoMax ControlNet Module

Publication number DSMBCN-UM001B-EN-P February 2003

Getting Support

Refer to page 79 for information on how to obtain support for the MBCN

module.

For support on the AutoMax processor or programming software, contact

Rockwell Automation or your local distributor.

Reference Documents

For information on using RSNetWorx, refer to:

• RSNetworx ControlNet Getting Results, Publication Number 9399-

CNETGR, Catalog number 9357-CNETL3

For information on ControlNet, refer to one of the following:

• ControlNet Specification, available from ControlNet International,

www.controlnet.org

, approximate cost US$350

• IEEE 518 Guide for the Installation of Electrical Equipment to

Minimize Electrical Noise Input to Controllers

• ControlNet user manual, publication 1786-2.12

Requirements

RSNetWork for ControlNet version 3.21 and above includes support for

configuring the MBCN.

MBCN firmware version 1.10 and above requires RSNetWorx for

ControlNet for configuration.

The MBCN must be running firmware version 1.10 or above to be used

with ControlFlash.

To use the connection status information, you need RSNetWork for

ControlNet version 4.11 or above and firmware version 2.1 or above on

the MBCN.

Refer to page 73 for information on updating the firmware in the MBCN.

Refer to page 76 for information on converting a revision 1 MBCN to a

revision 2 MBCN in RSNetWorx for ControlNet.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 79 80

Pas de commentaire

Rockwell-automation AutoMax ControlNet Communication Interface Module Manuel d'utilisateur Page 10