Rockwell-automation 7000 PowerFlex HMI Offering with Enhanced Function Manuel d'utilisateur télécharger pdf (Page 58)

56 Rockwell Automation Publication 7000-UM201B-EN-P - June 2013

Chapter 4 Drive Terminal Application

Diagnostic Control

The control screen, typical of Figure 53, shows the current status of the data

capture and provides a means to control the data capture process.

Last Trigger shows a time stamp (if available) when the last trigger occurred. The

status of the data capture shows:

• Stopped

• Running

• Triggered

• Force Triggered

When a trigger is stopped, it can be Re-Armed by pressing the ‘Re-Arm’ push

button.

While the data collection is running and waiting for a trigger condition to occur,

the user can elect to unconditionally trigger the data collection by pressing the

‘Force’ push button.

If the data collection process is to be aborted, press the ‘Stop’ push button. This

will allow the previous capture to be viewed. Once a trigger condition occurs, the

previously captured data is overwritten.

The ‘Export’ push button is currently not active.

Figure 53 - Diagnostics Control

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 89 90

Pas de commentaire

Rockwell-automation 7000 PowerFlex HMI Offering with Enhanced Function Manuel d'utilisateur Page 58