Rockwell-automation 2711P Creating Modbus Applications Manuel d'utilisateur télécharger pdf (Page 10)

Publication 2711P-UM002B-EN-P - March 2007

10 Installing Software

Install KEPServer

Enterprise

KEPServer Enterprise is used to:

• configure the KEPServer driver

• create tags

• test communications on the desktop.

KEPServer Enterprise is included with RSView Studio and can be

installed from:

• a CD or

• downloaded from the Rockwell Software web site at

www.software.rockwell.com.

KEPServer runs as a service and an icon will display in the toolbar.

The software can be installed by running the setup.exe file from the

CD or downloaded version.

Firmware Upgrade Wizard

The Firmware Upgrade Wizard is used to install KEPServer drivers and

upgrade firmware in the following devices:

• PanelView Plus

• PanelView Plus CE

The Firmware Upgrade Wizard is installed automatically with RSView

Studio.

The Firmware Upgrade (FUP) files with the KEPServer drivers is

available at http://support.rockwellautomation.com under

Downloads.

IMPORTANT

A current registered serial number is required to download

software from the Rockwell Software website.

IMPORTANT

When installing KEPServer Enterprise, be sure to select the

Modbus drivers if you are not doing a full install.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 91 92

Pas de commentaire

Rockwell-automation 2711P Creating Modbus Applications Manuel d'utilisateur Page 10