Rockwell-automation 22-COMM-B PowerFlex BACnet MS/TP Adapter Manuel d'utilisateur Page 22
- Page / 72
- Table des matières
- DEPANNAGE
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
2-6 Installing the Adapter
PowerFlex 40 Frames B and C, and PowerFlex 400 Frame C
1. Remove power from the drive, and remove the drive cover.
2. Use static control precautions.
3. Mount the adapter on the required special drive cover (ordered
separately; see Figure 2.5 for part numbers).
• Frame B: Do not use the adapter screw; snap the adapter in place.
• Frame C: Use the adapter screw to secure the adapter to the cover.
Important: To properly ground the adapter in Frame B drives,
install the special drive cover onto the drive using both
cover fasteners. To ground the adapter in Frame C
drives, tighten the adapter’s lower left screw (see
Figure 2.5
). In either case, tighten the screw(s) to the
recommended torque (0.9 N•m / 8.0 lb•in).
Figure 2.5 Mounting and Grounding the Adapter – PowerFlex 40 Frames B and C,
and PowerFlex 400 Frame C
Connecting the Adapter to the Drive
PowerFlex 40 Drive (Frame C
shown with cover removed)
0.9 N
•
m
(8.0 lb
•
in)
Adapter Mounted on Back of
Required Special Drive Cover
(Frame C cover shown)
PowerFlex 40 Frame B -- Part Number 22B-CCB
PowerFlex 40 Frame C -- Part Number 22B-CCC
PowerFlex 400 Frame C -- Part Number 22C-CCC
Ground for Frame C Drives
NOTE:
For Frame B drives, the lower left
adapter screw does not ground the adapter.
To ground the adapter, install the special drive
cover onto the drive using both cover fasteners.
- PowerFlex® 22-COMM-B 1
- BACnet MS/TP Adapter 1
- Important User Information 2
- Summary of Changes 3
- Table of Contents 5
- About This Manual 7
- Rockwell Automation Support 8
- Getting Started 9
- Features 10
- Compatible Products 11
- Required Equipment 11
- Safety Precautions 12
- Quick Start 14
- Status Indicators 15
- 1-8 Getting Started 16
- Installing the Adapter 17
- Setting the MAC Address 18
- Installing the Adapter 2-3 19
- UP = OFF 20
- TERM Switch (SW1) 20
- RSRV Switch (SW4) 20
- Reserved for future use 20
- Installing the Adapter 2-7 23
- Applying Power 25
- Terminal Signal Function 27
- +B Signal B TxRxD+ 27
- -A Signal A TxRxD 27
- Configuring the Adapter 29
- DIAG PAR A M DSEL MEM SEL 30
- DIAG PARAM DSEL MEM SEL 30
- DIAG PA R A M DSEL MEM SEL 30
- VALUE LIMITS SEL 30
- Configuring the Adapter 3-3 31
- Building Level Network 1 32
- Building Level Network 2 32
- Device Instance Number 33
- Setting a Comm Loss Action 34
- Setting the Comm Loss Time 35
- Setting the Baud Rate 36
- Resetting the Adapter 37
- Flash Updating the Adapter 38
- Using BACnet Objects 39
- Clearing a Drive Fault 40
- Supported BACnet Objects 41
- 4-4 Using BACnet Objects 42
- Using BACnet Objects 4-5 43
- 4-6 Using BACnet Objects 44
- Troubleshooting 45
- PORT Status Indicator 46
- MOD Status Indicator 46
- NET A Status Indicator 47
- NET B Status Indicator 47
- Viewing and Clearing Events 49
- 5-6 Troubleshooting 50
- Specifications 51
- Environmental 52
- Regulatory Compliance 52
- Adapter Parameters 53
- B-2 Adapter Parameters 54
- Adapter Parameters B-3 55
- B-4 Adapter Parameters 56
- Protocol Implementation 57
- Conformance Statement (PICS) 57
- Data Link Layer Options 59
- Device Address Binding 59
- Networking Options 59
- Glossary 63
- F Fault Action 64
- I I/O Data 65
- L Logic Command/Logic Status 65
- M MAC Address 65
- N NVS (Non-Volatile Storage) 66
- R Reference/Feedback 66
- S Status Indicators 66
- Z Zero Data 66
- Numerics 67
Produits connexes et manuels pour Équipement Rockwell-automation 22-COMM-B PowerFlex BACnet MS/TP Adapter
Équipement Rockwell-automation 1336S_E Drive Multipulse Bridge Assembly Manuel d'utilisateur
(14 pages)
(14 pages)
Équipement Rockwell-automation 20-COMM-ER 20-COMM-ER Dual-Port EtherNet/IP Commun Manuel d'utilisateur
(238 pages)
(238 pages)
Équipement Rockwell-automation 20D PowerFlex 700S Drive Ph I Control, Frames 1... Manuel d'utilisateur
(248 pages)
(248 pages)
(2 pages)
Équipement Rockwell-automation 23C PowerFlex 400 AC Drive Packages for Fan & Manuel d'utilisateur
(202 pages)
(202 pages)
© 2020, manymanuals.fr. Tous droits réservés | 0.135 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels