Rockwell-automation 20P PowerFlex DC Drive - Frame B Field SCR Module Manuel d'utilisateur télécharger pdf (Page 10)

10 PowerFlex® DC Drive - Frame B Field SCR Module

12. Remove the appropriate gate leads:

– For non-regenerative drives, remove each pair of (orange and yellow)

gate lead cables from connectors KG01…KG06 and push each lead

through the appropriate opening in the board.

– For regenerative drive, remove each pair of (orange and yellow) gate

lead cables from connectors KG01…KG06 and KG1…KG6 and push

each lead through the appropriate opening in the board.

Important: Carefully remove the gate leads by grasping the connector.

DO NOT pull the gate leads off by pulling on the wires.

For non-regenerative

drives, remove six gate

leads and route

through openings in

board

For regenerative

drives, remove 12 gate

leads and route

through openings in

board

1 2 ... 5 6 7 8 9 10 11 12 13 14

Pas de commentaire

Rockwell-automation 20P PowerFlex DC Drive - Frame B Field SCR Module Manuel d'utilisateur Page 10