Rockwell-automation 20B PowerFlex 700 Custom Firmware - Option AX Manuel d'utilisateur télécharger pdf

Instructions

PowerFlex

700VC Custom Firmware

“AX” Option - 80 Hz Maximum Frequency

Series B

This custom firmware differs from the PowerFlex 700 Vector Control

standard firmware (version 4.006, Series B) in the following ways:

• Drive parameter ranges have been modified to limit the maximum

programmable drive output frequency to 82 Hz or below (80 Hz

maximum speed plus up to 2 Hz overspeed limit). Refer to Table A

for modified parameter list.

• A “flash restriction” feature has been implemented to restrict user

re-flashing of the drive application firmware. Drives with the custom

“AX” option can only be re-flashed with a similar or newer version

of the custom “AX” firmware. Custom “AX” drives cannot be

re-flashed with standard firmware as this could create a potential

application issue.

ATTENTION: The Custom Firmware supplied is designed for a

specific application and load condition. It differs from the standard

PowerFlex 700 Vector Control product offering and must be installed

and run only under this custom application. Attempting to run this

Custom Firmware under any other type of application, could result in

unpredictable and/or hazardous conditions.

ATTENTION: This drive contains ESD (Electrostatic Discharge)

sensitive parts and assemblies. Static control precautions are required

when installing, testing, servicing or repairing this assembly.

Component damage may result if ESD control procedures are not

followed. If you are not familiar with static control procedures,

reference A-B publication 8000-4.5.2, “Guarding Against Electrostatic

Damage” or any other applicable ESD protection handbook.

1 2

PowerFlex 1
700VC Custom Firmware 1

Résumé du contenu

Page 1 - 700VC Custom Firmware

InstructionsPowerFlex® 700VC Custom Firmware“AX” Option - 80 Hz Maximum FrequencySeries BThis custom firmware differs from the PowerFlex 700 Vector Co

Page 2

2 PowerFlex® 700 VC Custom FirmwareTable A Modified Parameters:Parameter “AX” Option PowerFlex 700 VC Standard55 – Maximum Freq Min = 5.0 HzMax = 82

Commentaires sur ces manuels

Pas de commentaire

Rockwell-automation 20B PowerFlex 700 Custom Firmware - Option AX Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Équipement Rockwell-automation 20B PowerFlex 700 Custom Firmware - Option AX. Rockwell Automation 20B PowerFlex 700 Custom Firmware - Option AX User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Équipement Rockwell-automation 20B PowerFlex 700 Custom Firmware - Option AX