Rockwell-automation 20D-MDI-C1 Multi-Device Interface Option Board for Manuel d'utilisateur télécharger pdf (Page 7)

Multi-Device Interface Option Board for PowerFlex® 700S Drives 7

Remove the Phase II Cassette Covers (All Drive Sizes)

Step 5: Remove the

Existing MDI Option Board

Proper tightening torque

for reassembly is 6 lb.•in.

Removing the Side Covers

Task Description

Loosen the screws on the front cover and

remove the cover.

Loosen the screws on the side of the rear cover

and remove the cover.

Task Description

Remove the screw that secures the board to the control frame.

Loosen the captive screws.

Remove the MDI Option board, through-board pin connectors and insulating washer from

main Control board.

Remove the stand-offs from main Control board (on Phase I drives only).

Note: Phase I shown.

1 2 3 4 5 6 7 8 9 10 11 12 ... 19 20

Pas de commentaire

Rockwell-automation 20D-MDI-C1 Multi-Device Interface Option Board for Manuel d'utilisateur Page 7