Rockwell-automation 1799-DASCII DeviceNet Serial Interface Manuel d'utilisateur télécharger pdf (Page 10)

10 DeviceNet Serial Interface Module

Publication 1799-IN012B-EN-P - July 2008

DeviceNet Wiring

DeviceNet wiring connections are made to the plug-in connector. The connector

plugs into connector J1 on the circuit board.

Serial Port DB9 Wiring

The module operates as an RS-232 or RS-485 device, depending on how the serial

communication lines are attached. For information about serial port connections,

see the DB9 9-Pin Connector Signal Assignments table and description. All signal

lines are isolated.

Serial Port Connection

The ASCII devices are connected to the 1799-DASCII module by using a three-wire

(or five-wire for RS232 hardware handshaking) communication cable.

DB9 9-Pin Connector Signal Assignments

Pin RS-232 RS-485

1 TRXD-

2RX

3TX

5 Common Common

7RTS

8CTS

9 TRXD+

Network Connector (female contacts)

Network Connector (male contacts)

5 V+ Red

4 CAN_H White

3 Drain Bare

2 CAN_L Blue

1 V- Black

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 35 36

Pas de commentaire

Rockwell-automation 1799-DASCII DeviceNet Serial Interface Manuel d'utilisateur Page 10