Rockwell-automation 1793-IB16 Flex Integra Input Module Install Inst Manuel d'utilisateur télécharger pdf (Page 4)

4 FLEX Integra 16 Sink Input Module

Publication 1793-5.8 - December 1999

Wiring

This module is available with 2 styles of terminations: 1793-IB16 -

screw-cage and 1793-IB16S - spring-clamp. Refer to the wiring figure

below.

1. Connect individual sensor signal input leads to terminals 0 through 15

on row A (channels 0 thru 15 respectively).

2. Connect the associated sensor power lead to +24V dc on row (B).

3. Connect +24V dc voltage to V terminal on row B.

4. Connect 24V dc common to terminal COM on row A.

5. If daisy-chaining + 24V dc from this module to the next Integra

module, connect a jumper from terminal V to terminal 8 on the next 8

point Integra module or terminal V on the next 16 point Integra

module.

6. If daisy-chaining 24V dc common from this module to the next FLEX

Integra module, connect a jumper from terminal COM on this module

to terminal 0 on the next 8 point Integra module, or to terminal COM

on the next 16 point Integra module.

ATTENTION: Total current draw through the module’s

(V) voltage terminals is limited to 10A. Separate power

connections to the module may be required.

01 2345678 9101112131415COM

COM

41816

0 123456789101112131415

41814

COM

1793-IB16

Where: COM = common, V = +24V dc power, 0 thru 15 = inputs

1793-IB16S

1 2 3 4 5 6 7 8 9 10 11 12

Pas de commentaire

Rockwell-automation 1793-IB16 Flex Integra Input Module Install Inst Manuel d'utilisateur Page 4