Rockwell-automation 1769-L23E-QB1B_L23E-QBFC1B_L23-QBFC1B CompactLogix Manuel d'utilisateur télécharger pdf (Page 43)

Publication IASIMP-QS010B-EN-P - October 2009 43

Prepare the Computer, Network, and Controller Chapter 2

The Request History displays

all the devices, including the

packaged controller, on your

network that need an IP

address. The Ethernet address

(Mac ID) of the packaged

controller corresponds with

the address you recorded on

Network Worksheet.

5. Double-click the request

from your packaged

controller.

6. Enter the IP address and

record it on the

Network Worksheet

inside the

back cover.

If you are not using an isolated

network, obtain these numbers

from your network administrator.

7. Click OK.

8. Disable BootP/DHCP by selecting the packaged controller from the Relation List and

clicking Disable BOOTP/DHCP.

[Disable BOOTP/DHCP] Command successful appears in the Status bar.

9. Close the BOOTP/DHCP Server utility.

If you are prompted to save changes, click No.

IMPORTANT

For a device to retain its IP address through a power cycle, BootP/DHCP must be disabled. Complete step

8 to disable BootP/DHCP for the packaged controller.

IP Addresses Assigned Successfully

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 248 249

Pas de commentaire

Rockwell-automation 1769-L23E-QB1B_L23E-QBFC1B_L23-QBFC1B CompactLogix Manuel d'utilisateur Page 43