Rockwell-automation 1769-ASCII Compact Module Manuel d'utilisateur télécharger pdf (Page 10)

10 Compact 1769-ASCII Module

Publication

1769-IN068B-EN-P - May 2005

5. Place the modules back on the panel, and check for proper hole

alignment.

6. A

ttach the modules to the panel using the mounting screws.

If mounting more modules, mount only the last one of this group and

t the others aside. This reduces remounting time during drilling and

tapping of the next group.

7. R

epeat steps 1 to 6 for any remaining modules.

Mount on the DIN Rail

The module can be mounted on these DIN rails:

• 35

x 7.5 mm (EN 50022 - 35 x 7.5)

• 35

x 15 mm (EN 50022 - 35 x 15)

Before mounting the module on a DIN rail, close the DIN rail latches. Press

e DIN rail mounting area of the module against the DIN rail. The latches

will momentarily open and lock into place.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 39 40

Pas de commentaire

Rockwell-automation 1769-ASCII Compact Module Manuel d'utilisateur Page 10