Rockwell-automation 1760 Pico GFX-70 Controllers Quick Start Manuel d'utilisateur télécharger pdf (Page 54)

Publication 1760-QS002A-EN-P - April 2004

7-12 Lesson 5

We now simply have to start the configuration via Communication,

Configuration, Pico-Link. PicoSoft Pro starts to transfer the Pico-Link

intraconnect configuration to the master immediately. Each Pico-Link station

is assigned their own Pico-Link ID (in this case, 1 - 3), and the valid parameters

for baud rate and bus delay. After the transfer has been completed, you can

read the Pico-Link ID in the device display as NT1-NT3. The Pico-Link LED

starts flashing to indicate that the Pico-Link is functioning correctly.

The programs can now be downloaded without any problem. To avoid having

to download every program onto their respective devices individually, let us

switch beforehand from local to Pico-Link communication (via the master).

Choose Communication, Device, Pico-Link Operation to specify the

device with which the PC is to be connected. In our case, this is Device 1.

Choose Communication, Program, Download to start the download of the

individual circuit diagrams or all of them. In the selection dialog (see following

Figure) select All so that no programs are forgotten.

Click OK to start the program transfer to the devices.

Program selection dialog in Master mode.

TIP

Fortunately, PicoSoft Pro does this all for us

providing the following conditions are met:

The 1760-CBL-PC02 PC connection cable is plugged

in on the master

and the connection from the PC to

this device is Online

1 2 ... 49 50 51 52 53 54 55 56 57 58

Pas de commentaire

Rockwell-automation 1760 Pico GFX-70 Controllers Quick Start Manuel d'utilisateur Page 54