Rockwell-automation 1738-OW4M12AC ArmorPoint Relay Output Modules, Ser Manuel d'utilisateur télécharger pdf (Page 5)

Publication 1738-IN008A-EN-E - June 2004

ArmorPoint Relay Output Modules, Series A 5

3. Mount the base using #8 (M4) screws.

4. Ground the system using the ground lug connection. (The

ground lug connection is also a mounting hole.)

Install the ArmorPoint

Relay Output Module

To install the ArmorPoint relay output module, proceed as follows.

1. Using a bladed screwdriver, rotate the keyswitch on the

mounting base clockwise until the number 7 aligns with the

notch in the base.

2. Position the module vertically above the mounting base. The

module will bridge two bases.

Ground lug connection

Latching mechanism

Keyswitch-

Set to position 7 for

the 1738 Relay

output modules

Mounting base

43675

MOD

NET

1738-OW4M12/A

Form A

Isolated Relay Out

Module will bridge two bases.

43779

1 2 3 4 5 6 7 8 9 10 ... 13 14

Pas de commentaire

Rockwell-automation 1738-OW4M12AC ArmorPoint Relay Output Modules, Ser Manuel d'utilisateur Page 5