Rockwell-automation 1738-AENTR Armorpoint 2 Port Enet Adapter Manuel d'utilisateur télécharger pdf (Page 7)

ArmorPoint I/O 2-Port EtherNet/IP Adapter, Series A 7

Publication

1738-IN028B-EN-E - February 2010

Mount the Adapter and I/O Base

To mount the ArmorPoint I/O adapter on a wall or panel, use the screw holes

provided with the ArmorPoint I/O adapter.

Mounting illustration for the ArmorPoint I/O adapter with I/O bases

Follow the instructions to install the mounting base.

1. Lay out the required points as shown above in the drilling dimension

drawing.

2. Drill the necessary holes for M4 (#8) machine or self-tapping screws.

3. Mount the adapter using M4 (#8) screws.

IMPORTANT

The ArmorPoint I/O adapter must be mounted on a grounded metal

mounting plate or other conductive surface.

Adapter

102 mm

(4.0 in)

56 mm

(2.2 in)

46.25 mm

(1.8 in)

51.9 mm

(2.0 in)

20.1 mm

(0.8 in)

20.1 mm

(0.8 in)

51.9 mm

(2.0 in)

51.9 mm

(2.0 in)

44834

1 2 3 4 5 6 7 8 9 10 11 12 ... 23 24

Pas de commentaire

Rockwell-automation 1738-AENTR Armorpoint 2 Port Enet Adapter Manuel d'utilisateur Page 7