Rockwell-automation 1734-OB2EP Point I/O Protected Output Module Insta Manuel d'utilisateur télécharger pdf (Page 5)

POINT I/O Protected Output Module 5

Publication 1734-IN586A-EN-P - December 2001

module into the mounting base. In addition, make sure the mounting

base locking screw is positioned horizontal referenced to the base.

1. Using a bladed screwdriver, rotate the keyswitch (2) on the

mounting base clockwise until the number required for the

type of module being installed aligns with the notch in the

base.

2. Make certain the DIN rail locking screw is in the horizontal

position. (You cannot insert the module if the locking

mechanism is unlocked.)

3. Insert the module straight down into the mounting base and

press to secure. The module will lock into place.

WARNING

When you insert or remove the module while

backplane power is on, an electrical arc can

occur. This could cause an explosion in

hazardous location installations. Be sure that

power is removed or the area is nonhazardous

before proceeding.

1 2 3 4 5 6 7 8 9 10 ... 15 16

Pas de commentaire

Rockwell-automation 1734-OB2EP Point I/O Protected Output Module Insta Manuel d'utilisateur Page 5