Rockwell-automation 1734-IK Encoder/Counter Modules User Manual Manuel d'utilisateur télécharger pdf (Page 44)

Publication 1734-UM006B-EN-P - August 2005

4-4 Configure Your Module

Set Counter Parameters

After adding the module to the network, you must configure the

modules for use.

1. Configure the modules as shown below.

You will see a pop-up dialog with a series of tabs. Each tab provides

options view or edit.

Refer to the dialogs for an explanation of its features.

IMPORTANT

This chapter shows configuration in the online

mode. Changes set in this mode take effect when

you download to the individual module.

1. Right-click on the module.

2. Click on Properties to

configure your adapter.

You can also left click on the module or name

and the property dialog will pop up.

These are the tabs you click on to

view the options.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 67 68

Pas de commentaire

Rockwell-automation 1734-IK Encoder/Counter Modules User Manual Manuel d'utilisateur Page 44