Rockwell-automation 1734-8CFGDLX POINT I/O Module with 8 Configurable Manuel d'utilisateur télécharger pdf (Page 14)

14 POINT I/O Module with 8 Configurable 24V DC Points and DeviceLogix

Publication

1734-IN039A-EN-P - March 2009

You can select other produced assemblies:

• Produced assembly instance 4 is the first byte of produced assembly

instance 101 (Data [0]).

• Produced assembly instance 111 is the first eight bytes of produced

assembly instance 101 (Data [0]…[7]).

In RSLogix5000, the default tags will be:

• AdapterName:SlotNumber:I.Data

• AdapterName:SlotNumber:I.LogicDefinedData

• AdapterName:SlotNumber:I.Status.LogicEnabled

• AdapterName:SlotNumber:I.Status.Owned

• AdapterName:SlotNumber:I.PeerMissing

• AdapterName:SlotNumber:I.LogicDefinedIntData[0...7]

Data [16] Produce Network Analog Word 6

Data [17]

Data [18] Produce Network Analog Word 7

Data [19]

Where:

• Pt = state of the output point,

• PNB = Produce Network Bit,

• PM = Peer Missing (each bit represents the presence of a configured peer)

• Owned = Owned by a master.

When set to 0, the module is producing data without a master.

When set to 1, the module is producing while being owned by a master.

• LogicEn = Logic Enabled (0 = logic disabled, 1 = logic enabled)

Default Data Map - Produced Assembly Instance 101 (Continued)

Message Size: 20 Bytes

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 27 28

Pas de commentaire

Rockwell-automation 1734-8CFGDLX POINT I/O Module with 8 Configurable Manuel d'utilisateur Page 14