Rockwell Automation 1203-SSS Manuel d'utilisateur télécharger pdf (Page 44)

3-12 Configuring the Converter

PowerFlex 1203-USB Converter User Manual

Publication DRIVES-UM001D-EN-P

Configuring RSLinx for Serial Multi-Drop System

The Configured Driver in RSLinx is slightly different when configuring for

a RS-485 multi-drop system as opposed to a point-to-point system (single

drive).

1. Open RSLinx software.

2. From the Communications menu, choose Configure Drivers.

3. From the Available Driver Types pull-down menu, choose RS-232 DF1

devices.

4. Click Add New and enter a name.

5. Enter all settings as shown in the following image.

The Comm Port address will vary depending on the port that gets

assigned to the 1203-USB converter. In this example, the 1203-USB

converter is connected to COM3.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 111 112

Pas de commentaire

Rockwell Automation 1203-SSS Manuel d'utilisateur Page 44