Rockwell-automation T8110B/T8110 Trusted TMR Processor Manuel d'utilisateur télécharger pdf (Page 11)

Trusted

TMR Processor T8110B/T8110

Issue 18 Feb 08 PD-T8110B/T8110 11

2.3. Module Pinout Connections

2.3.1. External I/O Connector (PL1)

This connector provides a number of discrete input and outputs. These are provided to allow the

Trusted

TMR Processor status to be monitored by external hardware, and to allow the Trusted

TMR Processor to monitor the power supply status signals. The connector also provides access to the

communications ports and connections for IRIG-B input signals. To enable the communications ports

and IRIG-B facilities to be accessed, the user must install the following:

1. Processor Interface Adaptor T8120 for the communications ports.

2. Processor Interface Adaptor Unit (IRIG-B) T8121 for both communications ports and

IRIG-B facilities

Note: IRIG B and serial facilities are only available on the T8110B

PL1 is a 48-way DIN41612 E type connector.

Row

Pin A C E

2 Fault relay (NC) DIAG_RTN Failed relay (NC)

4 Fault relay (common) DIAG_IN_1 Failed relay (common)

6 Fault relay (NO) 0V Port 1 Failed relay (NO)

8 Not Connected Serial Port 1 B Not Connected

10 5V_D Serial Port 1 A IRIG-B122+

12 DATA_OUT 0V Port 2 IRIG-B122-

14 ENABLE Serial Port 2 B TX Reserved

16 DATA_IN Serial Port 2 A TX Reserved

18 CLK Serial Port 2 B RX/TX IRIG-B002-

20 0V Serial Port 2 A RX/TX IRIG-B002+

22 Chassis GND 0V Port 3 Chassis GND

24 Chassis GND Serial Port 3 B TX Chassis GND

26 Chassis GND Serial Port 3 A TX Chassis GND

28 24V PSU 1 LV Warning Serial Port 3 B RX/TX 24V PSU 1 Fail

Shutdown

30 24V PSU 2 LV Warning Serial Port 3 A RX/TX 24V PSU 2 Fail

Shutdown

32 24V Return 24V Return 24V Return

Table 1 External I/O Connector Pin-Out

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 37 38

Pas de commentaire

Rockwell-automation T8110B/T8110 Trusted TMR Processor Manuel d'utilisateur Page 11