Rockwell-automation Logix5000 Controllers Security Programming Manual Manuel d'utilisateur télécharger pdf (Page 52)

Chapter 5 Securing a ControlLogix controller

The Password Status for the controller changes to indicate a Password

exists in the controller, but the controller is not secured yet.

6. Click Secure Controller.

7. In the Secure Controller dialog box, in the Password box, type the

password for the controller and then click Secure.

8. If the controller has nonvolatile memory installed, you can select the Save

to Nonvolatile Memory after controller is secured check box to save the

security state of the controller to nonvolatile memory. Refer to the Logix

Designer application help for additional information on using nonvolatile

memory.

52 Rockwell Automation Publication 1756-PM016G-EN-P - October 2014

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 62 63

Pas de commentaire

Rockwell-automation Logix5000 Controllers Security Programming Manual Manuel d'utilisateur Page 52