Rockwell-automation Logix5000 Controllers Produced and Consumed Tags P Manuel d'utilisateur télécharger pdf (Page 21)

Produce and Consume a Tag Chapter 1

The Consuming controller must be set up to allow its consumed tags to accept an

RPI provided by the producer. Follow these steps to access the Controller

Properties dialog box.

1. In the Controller Organizer, right-click a controller that has been set up

with a consuming tag and choose Properties.

The Controller Properties dialog box appears with the General tab as the

default.

2. Click the Advanced tab.

3. Check Allow Consumed Tags to Use RPI Provided by Producer.

4. Click OK.

Set up the consumer tag

Rockwell Automation Publication 1756-PM011F-EN-P - October 2014 21

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 39 40

Pas de commentaire

Rockwell-automation Logix5000 Controllers Produced and Consumed Tags P Manuel d'utilisateur Page 21